10LikesThread: Getting rid of the ugly !!!!!!
Results 1 to 15 of 86
LinkBack URL
About LinkBacksHybrid View
-
12-31-2012 09:40 PM #1
CHR Member
- Join Date
- Apr 2009
- Location
- lockport
- Car Year, Make, Model: 41 willys
- Posts
- 352
I weld almost my whole life..The only thing that has been done to these welds was hit with a polishing pad...We then smooth them out with Filler.. I use to weld X-ray pipe.
Take that back.. I had to go back in look.. A couple filler welds was sanded down a little.. with a polishing pad..But the butt welds on the butt's was Beveled grind and fitted with a 1/8 gap, and filled the same way I did x-ray pipe..Last edited by no limits; 12-31-2012 at 09:49 PM.
Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
12-31-2012 10:00 PM #2
CHR Member
- Join Date
- Apr 2009
- Location
- lockport
- Car Year, Make, Model: 41 willys
- Posts
- 352
I have done this on many chassis I built.. Here's a few I built.. Nothing ever broke..
Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
-
12-31-2012 10:05 PM #3
CHR Member
- Join Date
- Apr 2009
- Location
- lockport
- Car Year, Make, Model: 41 willys
- Posts
- 352
No !!! I don't mind you asking..
Here's a few I have done..
Set no Limit's on yourself !!!!
''life is only a temporary assignment ''
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year