Thread: 87 Grand Marquis 2 door build
Results 1 to 15 of 40
LinkBack URL
About LinkBacksHybrid View
-
09-30-2012 10:19 AM #1
CHR Member
- Join Date
- Jun 2012
- Location
- Danville
- Posts
- 86
Installed duals using 90ish Mustang eqi length headers and off road H pipe.
-
10-11-2012 08:06 AM #2
CHR Member
- Join Date
- Jun 2012
- Location
- Danville
- Posts
- 86
Had to make some hangers based on the stock single frame mounts as replacements for either side were not available. One for the tail pipe hanger one for the muffler hanger.
-
10-11-2012 08:20 AM #3
CHR Member
- Join Date
- Jun 2012
- Location
- Danville
- Posts
- 86
Decided the car needed a new look. So I removed the front and rear bumpers and the grill. You might notice the head lite covers I made tooLast edited by turbo2256b; 10-11-2012 at 08:23 AM.
-
10-12-2012 09:13 PM #4
CHR Member
- Join Date
- Jun 2012
- Location
- Danville
- Posts
- 86
-
10-12-2012 09:41 PM #5
CHR Member
- Join Date
- Dec 2008
- Location
- Independence
- Posts
- 140
pretty cool, like the stance especially from rear, nice use of wheelwell wdith little available, me samething actually machined 3/16 spacers spacers for under load conditions, read turningLast edited by Dq383500; 10-12-2012 at 09:48 PM.
-
10-20-2012 10:57 AM #6
CHR Member
- Join Date
- Jun 2012
- Location
- Danville
- Posts
- 86
Decided the tail lites needed some work so I painted the edges that were cromish but deteriorated. Also felt the brightness wasnt to good either.
-
10-20-2012 01:27 PM #7
CHR Member
- Join Date
- Jun 2012
- Location
- Danville
- Posts
- 86
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Yep. It’s pretty sad.
Dead!