Thread: 87 Grand Marquis 2 door build

Tweet

Eventually installed equi lenght shorty headers and off road pipes into the stock mufflers. Rear shocks being a bit short issue was solved by installing double adjustable QA1 shocks. Purchased the coil over versions but no coil over coils at this point.


661.jpg

Somewere along the line I installed a Canton road race pan. It was left over from the Boss 302 in the 84 mustang. I wouldnt fit in it because of the road race style headers.


1067.jpg

410.jpg

Here is the car think its the summer I had to rebuild the passenger front torq box.
Battery cept busting loose flipping the car around corners. Battery impailed itself on a bolt and would drain one cell dry. Guess were the eletolite went. Into the frame. Poored some baking soda water mix all round were the battery sat and into the frame before repair. Soda was bubbling up like mad. Noticed the top of the frame rail from the torq box towatd the rear about a foot felt like there was a crack. Couldnt see it only enough room to feel for it.

526.jpg

528.jpg

More views

525.jpg

527.jpg