Thread: 1967 Mustang Coupe build
Results 1 to 15 of 278
Threaded View
-
03-30-2012 06:07 PM #1
1967 Mustang Coupe build
Well this project started in 1997 when I got it . I have a few others that side tracked me , like a move also . As with most Mustangs they rust on the inside out . 67mustang 007.jpg67mustang.jpg67mustang 003.jpg67mustang 005.jpg
I could have just patched it and ran , but since panels are so cheap I figured I would make it better then new .
It sat for about 8 years while house projects took some time . I started nipping at it a few years ago getting the drive line back in and moving on its own .
I found it just a little north of me , been in a garage for a few years after the hood launched into the air the guy quit driving it .
Here it is on the second day home , the first day some new feul lines and battery it fired right up . The mice had about a small bucket of corn stored in the exhaust so it took a while to clear it out .
My 2 sons , cleaning , buffing and waxing it all up .
This is how the rear aprons looked after Apollo Hood .
The left torque box and firewall was pretty bad . They make all the right parts to repair any rust out .
After I replaced the parts to the firewall and floor toe pan and the box . .Last edited by bluestang67; 09-22-2013 at 07:05 PM.
Shine's done a lot more hot rod & muscle car builds than me, but I've found an adjustable PV to be helpful in balancing front to back braking. All OEM vehicles use a non-adjustable proportioning...
Time for brakes