141LikesThread: 1967 Mustang Coupe build
Results 1 to 15 of 278
LinkBack URL
About LinkBacksThreaded View
-
03-30-2012 06:13 PM #2
CHR Member
- Join Date
- Sep 2006
- Location
- New Lenox
- Car Year, Make, Model: 67 Mstg cpe , 37 Ford Coupe
- Posts
- 2,787
I did the engine compartment first . I replaced the rear aprons and the right front where the battery sits .
Big issue with this type of shock tower and frame , is the build up of dirt and crud . The outer side of shock tower and to outer edge of frame it makes a pocket . It's about 1 inch deep by a few wide . It will cause drastic rot in the shock towers in most Mustangs . I was lucky and since this was garaged a lot it was clean and solid .
A lot of cleaning and sanding I finally got it to red oxide .
Needed to add this one in this line .Last edited by bluestang67; 09-22-2013 at 07:09 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I believe this was somewhere around 2015, Rick, Rosie and Johnboy
John Norton aka johnboy