Results 1 to 15 of 31
Threaded View
-
12-19-2011 12:39 PM #2
Almost finished firewall:



I didn't want a super pretty firewall. I plan on this being my daily driver, and I'm sure the engine will get pulled at least 20 more times before I'm happy with it, so I decided to go with a Gator Guard II coat.



The engine out of the 86 had bad crank bearings and want worth the rebuild. I got an 89 TBI 350 from a friend of mine for $300. Came with computer, harness, all accessories, fuel tank, and fuel pump. He's a good friend.



The gas tank I got was way too big, so I had to chop it up a little. Thanks to the H.A.M.B. I was able to get some advice on how to take care of that.



Ok, here I ran into a problem with the new engine. The position on the power steering pump majorly interfered with the lines coming from the steering box.


I found a smaller pulley that worked perfect. If anyone else needs to know, it's for a 91 Grand Prix 3.1 engine.

Experience has been a brutal but effective teacher.
EnragedHawk's Custom Creations
1955 Chevy Panel Truck Build Thread





3Likes
LinkBack URL
About LinkBacks
Reply With Quote
i've enjoyed the years here . made a lot of friends. most who have left. i see no reason to continue with this so hope to see you somewhere else. i dont think this site will ever be back. it's lived...
Dead!