Thanks to everyone for the positive comments.

Here's some other stuff I've been up to.

New bumpers get a shot of rubberized undercoat in the underneath. One thing I do is spread some chrome polish or wax on shiny side of the bumper. Any overspray comes right off and you shine up the chrome at the same time!


Here's the inside of my door that I sprayed some metal prep rust inhibitor on, followed by a coat of rubberized undercoat and finally some strips of dyna mat. I feel it made a difference.






Here's the initial mock up of my electric cooling fan. Didn't have room to make it a 'puller' so it's now a 'pusher' on the front of the radiator. The shroud was removed as it blocked too much air. The electric fan is controlled by a switch in the cab and should help with the Florida heat if it gets too bad in the summer. I still need to install a shroud around my belt driven fan.



Above and below, you can see where i mounted my B&M trans oil cooler using parts from my daughter's bed frame.


Sorry about the blurry pic but it still shows how I routed my tail light wiring.


That's it for now. Got some more pics to download off the camera so stay tuned!