Thread: P15 Plymouth Sedan Build

Tweet

I started by removing the front clip and getting the motor remounted. The pictures show the mounts that were there (now cut out) and the new ones I have made up and welded in. Then it is on to the firewall and floors. After measuring up the room the motor will need I made a template and created a new recessed firewall. Removed the old firewall and welded in the new one. After I welded in the new one I found out my angles were off and had to cut and reposition the recessed area .

Just before the ice storm struck and we lost power for a few days I managed to get the front floor fabricated and temporarily installed. I took some advice from the good people of this forum and made my own panels. I think they came out good. All is going well, until my electric shears broke a blade.
With warmer temperatures I hope to get back to work on the rest of the floor.

Question for you all - how should I protect these bare metal panels until I am ready to paint?

Thanks, Andy