Thread: 41 Willys Gasser project

Tweet

Originally Posted by roadster32

Cam is from Lunati Roger but yes gonna set it up off the can card.

Sorry, in #1 I read "...Comp chain & gears..." and jumped to the assumption that you had a package. My bad, but my question was more are you planning to put a degree wheel on it, indexed to true TDC and verify the valve action against the cam specs from Lunati, which you've confirmed. Some folks think "setting up the cam" means simply lining up the zero marks on the two gears and buttoning things up with a prayer that it's right.

Originally Posted by rspears

Sorry, in #1 I read "...Comp chain & gears..." and jumped to the assumption that you had a package. My bad, but my question was more are you planning to put a degree wheel on it, indexed to true TDC and verify the valve action against the cam specs from Lunati, which you've confirmed. Some folks think "setting up the cam" means simply lining up the zero marks on the two gears and buttoning things up with a prayer that it's right.

We will set it all up and remark the gears Roger, they look to be out by at least 15 degrees or so
.