Well the weather has been a little kinder today so carried on knocking jobs off the list
I needed to sort out something for Steve Hudson to tack the headliner too so before I did anything I stuck a piece of ply to the inside of the roof to mount the dome light on, to keep the wiring tidy and out of the way some small pieces of stainless tubing was stuck to the roof and around the door rame for the wiring to pass through.










Next up I needed a finisher to go under my steering wheel hub, noting too fancy just something tapered, had a rummage through my aluminium stock and found a piece of aluminium round bar just big enough, a short while on the lathe and it was done, a quick polish and it was slid in place. I will polish the purple anodising off later.








Next up I started cutting the wood for around the inner door frame, I used 3/8" plywood and screwed it into place as some of the edges have curves, I will glass up the holes and repaint once its all hard & dry.
I bonded it in place with GRP bonding paste after keying the fibreglass














Got both sides done but then it got dark so the roof struts will have to wait till next week


.