157LikesThread: 57 Chevy Cruizer
Results 1 to 15 of 893
LinkBack URL
About LinkBacksThreaded View
-
04-05-2011 04:39 PM #10
CHR Member/Contributor
- Join Date
- Jul 2003
- Location
- Madison
- Car Year, Make, Model: '67 Ranchero, '57 Chevy, '82 Camaro,
- Posts
- 21,160
Doing some time finish up some welding and fitting some 20ga. supports for the floor. In the front of the passenger compartment, got the lower dash welded to the firewall and finished out the sheet metal part of the driver's footwell. Hope to be gluing on some aluminum panels next week some time! Also cut out a couple spots in the right rocker panel that need patch panels. Amazing what a couple beads and a couple bends do to a piece of 20ga. sheetmetal...Made the floor support in the last picture the other day then got it welded in today...When you tap on it with a body hammer, it has the same solid sound as the 16ga. square tubing it's welded to!!!!Last edited by Dave Severson; 04-05-2011 at 04:42 PM.
Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Either return this forum to what was or get the HELL OUT!
Dead!