I've got most of the bits for this project squirrelled away but was lacking some door handles, had a look around but nothing floated my boat so decided to make some with holes in them to follow the theme in the car.

Luckily I had some 10mm stainless offcuts in the bin so a shape was drawn and cut out with a 1mm cutting disc, as this was easy to hold in the drill vice I drilled the holes before cutting out.





Once the shape was cut it was linished smooth ready for polishing. At this stage the shape was put into the handle with a soft sander and a curve was put into the handle by clamping in a vice over 3 small pieces of bar.






Here we have the polished handle, next I spun up a couple of pieces of stainless bar to weld to the handle to act as a extension, I forgot to take a picture of these I think





Here we have the handle welded up and the weld polished out, I'm pretty pleased the way they turned out
I robbed the baseplates off some old handles so these will be rechromed.











-