My 26T Coupe build thread

[Bruce lee]

You are good!!!!!!!!!!

[roadster32]

Hi guys, thank you for the very kind comments they are appreciated, Its taking a lot longer than i thought it would due to having to polish everything twice Its really difficult working on it and not marking it in someway

I think once the chassis is done progress will be a lot quicker

I welcome constructive crititism so if you see anything that looks wrong or could be done better let me know as nobody knows it all

best wishes
Steve.

[stovens]

Steve this is truely amazing! The stainless looks fantastic. Your welds are something to drool over! This will be one of those high level builds that inspire us all to strive for more. Like Don said you need to meet up with Ken Thurm out here on the west coast you both have an eye for the most minor detail.

[roadster32]

Thanks mate, Its surprising that it hasn't cost that much so far, the most expensive part so far was the 4" x 2" box, it cost me £90 plus an extra £20 to have it polished by a machine at the stockist's.
The rest is basically all from offcuts i get from my local steel merchants, I usually raid their scrap bin for large lumps of stainless and all they want is me to top up their tea fund, i guess it only goes for scrap value anyway.

I'm not wealthy so to keep the costs down i do all the basic polishing and only give the difficult bits to my polishing friend who is real good to me anyways.

I'm lucky that i can do everything myself excluding trimming (although i may have a go myself this time) so its only costing me time.

Its not a budget build but not mega bucks either.

Cheers
Steve.

Steve this is truely amazing! The stainless looks fantastic. Your welds are something to drool over! This will be one of those high level builds that inspire us all to strive for more. Like Don said you need to meet up with Ken Thurm out here on the west coast you both have an eye for the most minor detail.

[Itoldyouso]

it cost me £90 plus an extra £20 to have it polished by a machine at the stockist's.


Hehe, Steve, I just noticed something that I had never given any thought to. Evidently, your keyboards in England have pound signs instead of dollar signs, like we do. Very obvious that they should, but I just never gave that any thought.

What is a "stockist?" (you'll have to bear with us Americans, we just figured out "bonnet" and "tyres.")

Don

[roadster32]

Don £90 is $130, £20 is $29

A stockist is one down from a manufactorer, they stock the material and sell to the trade.

I will have you understanding english in the end remember a quid

Our keyboards have a £ key and a $

Got to go now the Queens coming for Tea LOL

it cost me £90 plus an extra £20 to have it polished by a machine at the stockist's.


Hehe, Steve, I just noticed something that I had never given any thought to. Evidently, your keyboards in England have pound signs instead of dollar signs, like we do. Very obvious that they should, but I just never gave that any thought.

What is a "stockist?" (you'll have to bear with us Americans, we just figured out "bonnet" and "tyres.")

Don

[Whiplash23T]

Hey Steve, you better tell Queenie to lighten up on Fergie and give her some more pounds to spend so she feels she does'nt have to sell out the royal family.. I also try to remember the difference in the lingo between her and the States.

[roadster32]

Alan i make mistakes like everybody else, the clever bit is making sure others don't notice them

Cheers for the kind comments. I like your signature, how true.

Steve,
Hate to be nit-picking but I was looking at the photos of your welds under an electron microscope and I clearly saw that one of the weld puddles on the spring perch was a full .03mm bigger than the others. This shoddy workmanship will never do! Tighten it up, dude!
Exceptional fab work.
Alan