Thread: Followed Me Home, '33 Build

Tweet

oh i have been there cutting past the clear in the base can be sensitve but you have time were many times we did not watching thinner and recoat time as the base can roll up the edge of the clear has alot to do with who,s system you used . cutting it open and letting it dry good then re sand it so if it shinks down it will be flat. i would add a day or two more make sure thinners are out and is some what hard with many base coats you have a recoat time for clear i would wait as long as you can . put your first coat of clear down some what dry let sit for a good long time next coat slow down just abit more till you get the build you want first two coats of clear you do not want to wet on wet if you hammer it you will have a mess