Today's sunshine and warm temperature let me move outside with the hood, using my flatbed trailer as a sanding bench. I think I've had the hood off & on more times in the past week than in the past two years! It's not perfect, but it's a darned sight better than it was a week ago, and pretty close to being ready for a coat of primer to really see how smooth it is. Here's a few shots of the front - after getting the front lip trimmed I built up the leading edge a bit with Fibral Lite, and shifted the curve forward a little.







And here's the back edge. There will be about 1/16" to 3/32" of fill on the cowl in a couple of places, which should be an easy fill.