Thread: Door Threshold
Results 1 to 4 of 4
LinkBack URL
About LinkBacksThreaded View
-
11-22-2010 10:51 AM #1
CHR Member/Contributor
- Join Date
- Sep 2007
- Location
- Gardner, KS
- Car Year, Make, Model: '33 HiBoy Coupe, '32 HiBoy Roadster
- Posts
- 11,241
Door Threshold
I'm needing to get/make a door threshold to cover wiring, and to cover the carpet edge. With a 1" channel my threshold has an extra "step". I have considered making one out of some nice walnut, hollowing out a wireway on the bottom and dropping over the edge about an inch to meet the step shown and finishing it to a satin shine. The edge bows out in the middle, so it will be cut to fit. Also thinking that a re-pop stock piece might still fit OK, even with the channel. Here's what I'm dealing with - the tape comes down to the extra step which is nominal 1/8" inset from the "natural" edge below it. I know tha in time a wood piece is going to be scuffed and will require periodic refinishing. Any thoughts? Good source for a re-pop threshold, if that is the answer?Roger
Enjoy the little things in life, and you may look back one day and realize that they were really the BIG things.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Dammit, another good ol boy gone. Condolence to the family. RIP Mike
RIP Mike Frade, aka 34_40