Thread: frame swap out
Results 1 to 8 of 8
LinkBack URL
About LinkBacksThreaded View
-
05-18-2005 08:28 PM #4
CHR Member
- Join Date
- Apr 2005
- Location
- san diego
- Car Year, Make, Model: 49 buick sedanette
- Posts
- 8
once again thanks for your help inspector.
so if i was to replace the front clip would i bolt it on? or would it have to be welded? if i welded it would it comprimise the strenth of the frame? you mentioned at the bottom of the page would be popular clip donors, but i didnt see what you were refering to. i found a web site that told me of the exact wheel base of my car, but im gonna measure my car myself to be sure.
if i was to install "air ride" suspension, should i do it while in the process, or should i put the tubing in first to keep the control arms and all in place, and then put bags on after im done?Last edited by 49 sedanette; 05-18-2005 at 08:30 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build