-
05-11-2004 08:52 AM #1
cam degre info
i have a 69 351w with a crane pwr max cam upgrade dur int204 exh216 with a set of rhodes lifters and HO heads i need to know what i should degre the cam to . i have been told that 4 deg would be ok but i have also been told to take it to 7 deg any thoughts wold help. i want all the torqe i can get .Last edited by Donny; 05-20-2004 at 10:17 AM.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
Building a 1937 Caddy with a LS 2 engine. Looking at the exhaust system and wondering if I really need to put an X or H pipe in the system or can I just go straight dual exhaust. Will performance be...
Exhsust system