Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree2Likes

Thread: 90% convinced i have a collapsed piston skirt
          
   
   

Reply To Thread
Results 1 to 15 of 22

Hybrid View

  1. 09-04-2012 08:16 PM #1
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    Quote Originally Posted by IC2 View Post
    No, Pat, that was my first mistake with this engine. I decided a 351 with the extra width across the head would cause problems so I bought a 302/5.0L crate motor instead.

    I know, not smart as I have a fair amount of good experience with 351W's and NEVER a problem - ever
    i have new pistons for the 302 CH 1.600 i pull them off the shelf see what i have right now i just do not remember .if they were dish and i wanted flat tops with the 351 head i used or there 030 and i needed to go 040 on the 289. anyways i will give you a very good deal on them they do not cost much at the time and more to send back
    Last edited by pat mccarthy; 09-04-2012 at 08:24 PM.
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink