Doubt the stock intake, without some extensive extrude hone time, is going to be up to the task. Friend of mine tried a similar setup using the stock ECM, it ran but the computer never seemed to be able to be able to keep up with the cam.

Also probably going to need a good regulator with a return port and a return line to the tank.

Anyway, can you get the car to run? Probably. Will it go into the 12's? Doubt it, for sure not with the stock ECM, it's not going to be able to handle the rest of the mods. Especially bigger cam and porting work seem to get "out of range" for the computer to adjust fuel and spark curves to.