Thread: world windsor jr and sr heads opinion

Tweet

Moved to new thread...

As HOSS said, the aluminum heads are worth an extra $300....Here's a re-sized photo if you want to edit your post and remove the H-U-G-E photo.

Originally Posted by techinspector1

As HOSS said, the aluminum heads are worth an extra $300....Here's a re-sized photo if you want to edit your post and remove the H-U-G-E photo.

i`m trying ... i dont know how .. it wont let me edit it away

Check before you order the heads. I bought the E Street heads and had to return them immediately because I found out they are for flat tappet cams only. I then ordered the Performer RPM heads that Edelbrock said would work with my roller cam engine.

Don

Originally Posted by Itoldyouso

Check before you order the heads. I bought the E Street heads and had to return them immediately because I found out they are for flat tappet cams only. I then ordered the Performer RPM heads that Edelbrock said would work with my roller cam engine.

Don

Thanks Don, that's why I raised the question of valve springs on the DynoSim thread.