Thread: 351 w oil pan

Tweet

i am doing a 351w engine .the guy is putting it in a 72/74? torino any ways i have two stock pans front sump and dual sump ?? he can not tell me or look at what may fit the car.so what pan to put on it ? anyone knows what pan will fit is thing .Thanks .god help me i am working on another ford

Originally Posted by DennyW

Pat, I would ask him to take a few measurements from the firewall to the steering, and mounts to the steering. That will give you a better idea. And what kind of car ?

it is a torino

Originally Posted by DennyW

Is the oil dip stick in the timing cover ? If so, front sump oil pan...If not, you will have to change the timing cover, I believe.

thanks denny the engine came out of a van and he pick up parts at the swap meet stuff and just drop all off to me so it s hines 57 of parts

use the front sump pan .. if need be you can drill a new dip stickhole in the timing cover .. the boss is there even in the rear sump pan style front cover .. then install a front sump dip stick ..

great thanks Hoss429

Denny

remember Byron drags Saturday--I'll be there with some of the Windy City Cobra Club
if you go over look me up

Jerry

club hot rod needs a tune up or she up on the chip.. or my dsl is bad?

Originally Posted by DennyW

Pat, sounds like your fuel filter is plugged....

Turn the modem off for 10 secs, and then back on, and let it go through the sequence to reestablish the settings. That usually does the trick. It can get it's second wind...

ok thanks ..yes that did it ?well i think that did it .well some day maybe i get to shoot the bs with you denny .but i have to stay round here for now. sell some stuff find some work try to make some $$. when i went to see jerry i did look on the map you abit west of him ?.i would allmost go back to get lunch at the place we ate at great food

nice map....ok you are up and over

72-76 full size and mid size came with front sump pans.