Thread: block huggers

Tweet

Y s are EZ to make and work great i have made some sets great when you do not have much room have a set on the 50 chevy. you may want to look at mac headers nice stuff

See the F150 or smilar with the collector forward may be just the ticket i need . I think im beginning to see some of the modern equipment and engine parts are going to make this 5.0 in the A a lot easier . Also i can see you have to work the science out when you are changing the norm . Which these parts houses were doing that and not for just the sbc .

Still have to find some specs and see width and collector location when installed . Or get some of a idea .

Add 10 characters my a$$.

Where and lost your post and links was there missed saving to favs .

You have mid 80's to mid 90's mustang headers, the worst you can use! (Sorry), really, any header is better.

look here ----> http://mustangsunlimited.com/keyword...ders&x=20&y=15

Pat

I'm using $265 Sanderson's on my project - they were originally uncoated but are now Jet Hotted. They do not extend below the pan by very much though it did take a bunch of fit up time to make 'em work that way.

Hemi yeah there anemic in power its just the look i would rather have . My plugs are in the side of the head and chambers are round .


Ireland same i want to run the shorty for its look and difference to the huggers if i can find something . Dave had the truck idea and searching they do have the ones that should work . This would keep heat a bit furthar away from firewall. The styles vary so much on different years may have to use right from one yr and left from another . I dont live in truck country but there is a few in the u pick it from time to time . Hope i can find something used for it untill i get it all figured out .

I think i found them 87 to 96 F150 but then again is pic a reference