Thread: 289 HP Heads....
- 
	02-12-2008 05:14 AM #1289 HP Heads....
 
 Hey guys...how much would you expect to pay for 289HP heads??
 
- 
    
    
 Advertising
   - Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
 
 
 
- 
	02-12-2008 05:54 AM #2
 I would say $500.00 for the pair . The Hi-Po 289 heads are not that much different then the 1965 to 1967 stock 289 heads . They both have the 1.78in/1.45ex valves and the 54.5cc chambers . The Hi-Po heads also have screw in studs and HD valve springs . There casting #s are #C50E-A #C5AE-E #C7ZE Also the Hi-Po castings had slotted pushrod holes . If you need to have # matching heads buy them . But if your just looking to build a 289 like a Hi-Po make the Mods to a set of stock 289 heads and port them . Originally Posted by Jazzstorm Originally Posted by Jazzstorm
 
- 
	02-12-2008 06:22 AM #3
 what he said ... they`re worth a ton to someone who needs to build a #s matching motor but for a few hunnert bucks more get some aftermarket heads if you want sumptin for power ..iv`e used up all my sick days at work .. can i call in dead ? 
 
- 
	02-12-2008 06:30 AM #4
 Here are some COOL Hi-Po 289 Photos .
 
- 
	02-12-2008 07:04 AM #5
 Thanks guys! Actually I am looking to sell them. My engine is all done and I am very pleased with it! 
 
 See my photos!Last edited by Jazzstorm; 02-12-2008 at 07:07 AM. 
 
- 
	02-12-2008 07:43 AM #6
 This is my 1965 289 4 Speed Hi-Po Mustang . This year the stock wheels and Hub caps go on .
 
- 
	02-12-2008 11:01 AM #7
 Looks Nice!!!
 
- 
	02-12-2008 07:48 PM #8
 I know how we can fix the picture. Originally Posted by DennyW Originally Posted by DennyW
 Change the picture to show a 68 Camaro.
 Whoops, that must be the cold meds. talking again,  
 
- 
	02-12-2008 07:48 PM #9
 Thanks Denny W it's a Texas car has a few chips . But No Rust and No Bondo. The inside is like new red with a 4 Speed I have the Hurst White shift ball . The 289 was just rebuilt Forged every thing It's a 289 Hi-Po but it has some mods . Headers Uniite dist AFB Carb . This year I am going to put on this intake manifold . Hay check out the Monte Carlo in the yard . It's in the garage now . COOL I told you I like FORD's  
 
- 
	02-12-2008 08:12 PM #10
 No I call them like they are . But that may be OK . The good Lord know's Tango has enough engine's for one . Originally Posted by DennyW Originally Posted by DennyW    
 
- 
	02-12-2008 08:14 PM #11
 That's MR. Maro to you Denny. Originally Posted by DennyW Originally Posted by DennyW  
 
- 
	02-12-2008 08:16 PM #12
 That Poor Camaro what it has gone threw  Last edited by tango; 02-12-2008 at 08:24 PM. 
 
- 
	02-12-2008 08:52 PM #13
 I think so to like a 1970 . This way when you beat them Ford guys . They won't feel so bad .    
 
- 
	02-12-2008 09:03 PM #14
 When you look back you will think you beat a GEN I Camaro .  
 
- 
	02-12-2008 09:46 PM #15
 Well, it's mine and I built it all.... Stock is boring, what can I say? Originally Posted by tango Originally Posted by tangoYesterday is history, tomorrow is a mystery, Live for Today! 
 Carroll Shelby
 
 Learning must be difficult for those who already know it all!!!! 
 





 
		
		 LinkBack URL
 LinkBack URL About LinkBacks
 About LinkBacks 
 
					
					
 Reply With Quote
 Reply With Quote
 
						
					

 
			
		
I'm happy to see it back up, sure hope it lasts.
Back online