27LikesThread: ford 289 cam size
Results 1 to 15 of 30
LinkBack URL
About LinkBacksHybrid View
-
03-09-2016 06:55 PM #1
CHR Member
- Join Date
- May 2003
- Location
- Zephyrhills, Florida, USA
- Car Year, Make, Model: '32 Henway
- Posts
- 12,423
In order to intelligently choose a cam for a motor, you must know the exact static compression ratio of the motor. Please read through this tutorial, which explains why....
Originally Posted by topthat
http://www.crankshaftcoalition.com/w..._compatibility
This information was taken from the Crane Cams engineers and simply condensed into the table that you see on the tutorial. Here is the same info in the application section of the Crane Catalog for 260/289/302 Ford motors. You can see that the recommended compression ratio increases as the cam timing gets snottier.
http://www.cranecams.com/196-199.pdf
.Last edited by techinspector1; 03-09-2016 at 07:01 PM.
PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year