Worked on it Sunday from about 2:00 til 8:00PM
Man is my back and legs sore! I'm not as young as I used to be!
I had to remove the plenum to get to the rails, we got it installed, with no leaks. Only problem we ran into was the vacume lines that run all over the place. The car is a 1990 and those plastic lines are so brittle that if you just move one they break. I am heading out this afternoon to the parts store to buy some small diameter rubber hose to splice the lines back together.
I do have one question, there was a U shaped bar that went from the back of the plenum down to the block. I am quessing that this is a support for the drivers side flange of the plenum? Am I correct?