Thread: 1/8 mile times
-
07-14-2005 07:45 PM #1
1/8 mile times
Hey Guys,
My little 302 ran a 8.58 @ 85 mph with a 2.01 60ft time. I'm going to the track Sunday again with a different throttle linkage so I hope to be able to get that time down. I seems like my secondaries where not opening all the way. I don't drag race much but is this time about right for my mph or should it be faster time wise.
Later Dennis
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
07-14-2005 08:42 PM #2
Depends, you haven't mentioned if you have any mods or what?
-
07-14-2005 09:10 PM #3
Re: 1/8 mile times
Originally posted by dennis kelley
Hey Guys,
My little 302 ran a 8.58 @ 85 mph with a 2.01 60ft time. I'm going to the track Sunday again with a different throttle linkage so I hope to be able to get that time down. I seems like my secondaries where not opening all the way. I don't drag race much but is this time about right for my mph or should it be faster time wise.
Later Dennis"PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
-
07-14-2005 09:14 PM #4
Card only shows time, but speed was 87 if my memory hasn't failed me."PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
-
07-14-2005 09:19 PM #5
Originally posted by pro70z28
Card only shows time, but speed was 87 if my memory hasn't failed me."PLAN" your life like you will live to 120.
"LIVE" your life like you could die tomorrow.
John 3:16
>>>>>>
-
07-19-2005 05:19 PM #6
The mods are a heads cam and intake. It is in a cobra kit car. The MPH seem fine but the time seem slow. But its a bear to launch
-
07-28-2005 01:50 PM #7
Get that 60 foot time down and u should pick up a little
-
08-31-2005 07:08 PM #8
New track time. 8.43 at 85mph
later dennis
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project