Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 
Like Tree2Likes
  • 1 Post By rspears

Thread: Recent FE390 engine rebuild engine smoking problems solved I believe.
          
   
   

Results 1 to 4 of 4

Threaded View

  1. #3
    69Bee's Avatar
    69Bee is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2016
    Location
    Whetstone
    Posts
    58

    Exhaust crossover ports to aid in heating up the manifold when cold. You can usually get gaskets that block these ports off, but make sure that are metal block-off plates. Sometimes they are just the gasket material, and feel that these can burn thru.

    If you are buying a manifold anyway, the Edelbrock 7105 Satin RPM Performer does not include this passage. Fel-Pro 1246 or 1247 should fit fine, just check which one for your application.
    Last edited by 69Bee; 05-28-2016 at 07:02 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink