Thread: FE Tech Info
-
11-13-2007 05:30 PM #1
FE Tech Info
HELP!! I have to modify a supposedly universal bell housing for a dynomometer to fit an FE 427 and I don't have the dimensions for the bolt and dowel pin locations. Any help?
Thanks, Roger
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-14-2007 08:45 AM #2
Hi Denny, I was being facitious because the dyno mfgr claims it is universal and except for the FE I think it is. Do you know of a web site that sells schematics or drawings for downloading this kind of info?
Thanks, Roger
-
11-14-2007 11:29 AM #3
Shoot me your email. I can supply the blue print for the rear of the block is that's any help. There are also eccentric dowels you can get to help dial it in. Is this a McLeod bell?
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance