hello!
can anyone tell me what torque I should use for the arp rodbolts for a FE engine?

the instructions go as far as telling to prestretch the bolts with 50 lbs/ft (doing that 3 times in order to get the desired stretch)

but what I don't see, is the final torque-level...is this 50 lbs/ft also?
I know it isn't as much as the level, used in the books with the standard fomoco bolts...but 50 seems a little on the low side?!

ow...using the arplube and the 190.000 PSI type bolts....