Thread: ARP rodbolt torque specs
Threaded View
-
03-29-2006 01:07 AM #13
oh yes i know what it is . but it hang on for ever and it has no place on the bearing. you can use it if you want . it has grit to it not good for bearings. but i works on new flat type cams and arp bolts or studs push rod ends shoe rocker balls you laces all that crap in the rod and mains and if it throws it on the pistons walls the rings my not seal up oil base or lithium is all i use on the bearings all .that molly in the oil is not good for the rings.on the brake in that why i said oil base assem lube on the bearingsLast edited by pat mccarthy; 03-29-2006 at 01:15 AM.
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance