Thread: exhaust crossover in intake

Tweet

Read these descriptions from Edelbrock and make up your own mind where you want the power.....

Performer® Manifolds (idle to 5500 rpm)
Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and patented runner design that you won't find in other brands. This patented design greatly improves torque over a wide rpm range for excellent throttle response, especially off-idle through the mid-range. Throttle Performers are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. There are EGR and non-EGR versions available for most domestic V8 and some V6 engines. Most Performer intakes are 50-state street legal, when used with the correct carburetor and in the correct application. Check the individual listings for detailed information.

Performer RPM™ Manifolds (1500 to 6500 rpm)
Performer RPMs are dual-plane, high-rise intakes with 180° firing order to produce incredible top-end horsepower while retaining good throttle response. Their larger plenums and runners match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. They are intended for high-performance street or competition engines that run up to 6500 rpm. They are not for emissions equipped engines. Edelbrock's Performer RPM gives you the ultimate in street high-performance.

Remember this, what you gain on the top, you give up on the bottom. There's no free lunch!