-
help!!!
hey guys (and/or gals);
i just put heads from a 1964 ford galaxie on my 1976 f-100 witha 390. after the first try it ran but had an intake gasket leaking, secound time i got the intake gasket leak stopped but can't get the thing to start to save my life. its on #1 tdcc, coil is hooked up, fuel is getting to the carb, etc.... i am drawing a blank on what it might be.:confused: :confused:
-
basics
Just be sure your simple stuff is covered: Be sure coil is Good, and check all connections. check your points?? Gas or spark is sure to be your prob. Good luck.
-
Check timing / dist position. I assume you had it out to fix leak? Might be off 1 tooth or out 180 eegrees.
Was it very late, or the beer too good?
-
may be funning too rich. The intake leak gave the engine the air it required for the proper mixture.