Quote Originally Posted by parpart View Post
I figured out the pushrods- used ARP lube on valve tips, and found an 8.8" pushrod worked best and gave the centermost line across valve tip. Ordered Trick Flow 3/8" dia pushrods to save $50 and will be degreeing this thing next week! Thanks everybody for your help. Rod cap problem was easily fixed too.
8.800" sounds awefully long for most BBF cylinder heads. Which heads are you using? What is your valve spring installed height? Most all custom BBF builds use different length pushrods on the intake and exhaust. And where the roller tip rides on the valve has literally nothing to do with vavle train geometry.

Paul