Thread: headers

Tweet

yes the merge collectors seam to be the way to go . no i have not made a set by the time i get all the tubes fitting i am burnt out and it seams no one want to pay more for them any ways. but i was thinking of making a set for my goat it shure dose not need any more low end .but i could test them to know if they are worth it. your primaries may be longer then 36 if you are going out side of the car so this may help lowend .and if you have the room go to 2 1/4 is can get tuff to do .you want a nice flow out of the headers so you may have to dump two thru the inner fender and make them slip fits .i use a old piece of tub and hold it to the head to see were thing may get in the way and see if the first bend will not get bent to bad and i try to keep a way from the steel donuts they have a supper tigth radii on the for 2 1/4 it would be on 2 1/4 you may need to use some but it can get verry $$. i hope is helps