Thread: High Power Flathead
Results 1 to 15 of 77
LinkBack URL
About LinkBacksThreaded View
-
10-15-2009 06:25 PM #13
CHR Member
- Join Date
- Sep 2007
- Location
- UPSTATE New York
- Posts
- 4,336
...not out of any standard Ford car based flathead that I ever saw without wet sleeves and an impossible 3.56 bore and something like an unbelievable 4.375" stroke - not when you start with a 3.188 x 3.75 or 4 inches!!!!
Originally Posted by nitrowarrior
Maybe if you start with a 336 cid Lincoln or F8 truck engine - it's possible since that one started with a 3.5" bore and a 4.375 stroke and a whopping 150 Hp or so out of a boat anchor weight engine still with a three bearing crankshaft having the harmonics of a floppy rubber band.
Ken - looks like you and I are the nay sayers on this one
Last edited by IC2; 10-15-2009 at 06:29 PM.
Dave W
I am now gone from this forum for now - finally have pulled the plug
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Turn out the lights, the party's over THIS PLACE IS DEAD!
Dead!