Thread: Touring motor
-
08-03-2009 06:31 PM #1
Touring motor
For my Hot Rod friends
Hopefully the attachment with the engine picture will be attached. This is a french block 3/8" x 1/2" . I have some pictures of the dyno tests and will attach if this works. The engine pulled 305 ft lbs and 205 HP. It was tested on a dyno that reads out SAE corrected hp. It pulled as much as 320 ft lbs but mapped out 305 for the street. It is pretty much over at 4500, but that's OK. It's built to run down the road with a Columbia at 2200 rpm ( max tq)
Dick in Havasu
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
08-04-2009 12:00 PM #2
re-size on the first pic
-
08-05-2009 05:57 PM #3
Very cool. What are you going to put it in? Flatheads for ever.
-
08-08-2009 09:25 AM #4
That's one purty motor; nice!! Love those heads and induction. What's it in??Rrumbler, Aka: Hey you, "Old School", Hairy, and other unsavory monickers.
Twistin' and bangin' on stuff for about sixty or so years; beat up and busted, but not entirely dead - yet.
-
09-06-2009 08:11 PM #5
flathead build
This is the roadster the flatty fits in. Real Henry with a 2 speed rear end.
Just finished a 1200 mile trip and about to embark on a 2000 miler. Runs cool in the 115 degree Lake Havasu AZ weather. 19 mpg @ 70mph.
Kerker
-
09-07-2009 04:20 PM #6
Excellent!!!
I was in a couple's home trying to fix their internet connection. The husband called out to his wife in the other room for the computer password. "Start with a capital S then 1 2 3" she shouted...
the Official CHR joke page duel