Thread: Timing questions
Results 1 to 7 of 7
LinkBack URL
About LinkBacksThreaded View
-
09-11-2004 08:01 AM #1
CHR Member
- Join Date
- Aug 2004
- Location
- Lafayette
- Car Year, Make, Model: See above ^
- Posts
- 15
Timing questions
Well, the new builder will have my motor ready for me by the end of the week. I have a question about setting the timing. Here is my combo :
70' Chevelle SS w/ a 470 ci. Ported Merlin rectangle port heads, 13:1 JE pistons, Lunati solid roller .685"/.692", Coan built 400 w/4500 stall.
I have a MSD billet distributor w/o vaccum advance. It has a total advance of 21 degrees. I am going to run 116 race gas. How do you guys recommend I set my timing? Once again, I am new to the carburated/Non-EFI world. Therefore any other advoce you have would be great!
BrentLast edited by 306bullet; 09-11-2004 at 08:49 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Well to be as brief as I can the first shoot of color looked good but when I started spraying the clear I discovered all these paint flakes on the hood and back of cab. The 3m plastic sheeting I was...
Stude M5 build