Has the carb been rebuilt lately and what size of carb?
It was rebuilt about 4 months ago and was being painted for 3 so it didn't run much. It is a 625cfm

Gerig, if you'll do what I suggested you do in the first place, your problem will be solved. Go to the owner's manual and read "Calibrating the power mode staging". It describes exactly the problem you're having and the fix for it.
I have already read the manual and that is not what I'm looking for, I have already changed the springs and that didn't help, it just says that it could be a metering problem but I already know that. I'm pretty sure I need to lean it out because the idle mixture screws don't work but I don't know how many stages back I need to go and I want to get an idea before I go out and buy more jets and rods that won't work