Thread: Rochester Quadrajet
-
05-20-2004 09:24 AM #1
Rochester Quadrajet
I have a question. I have a 84 camaro z/28 with a 305, and i had to put on a new carb recentely. I need to tune the carb a little to get the best fuel economy and best performance mix, due to the damn gas prices. And i was wondering if anybody knew which side was the fuel, and which side is the air. There are two screws on teh front of the carb. I would greatly appricate it.
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
05-20-2004 09:48 AM #2
2 screws on front are for idle mixture, run em in and back em out 1 1/2 to 2 turns Heres some resources.... ......http://www.buickpartsdirectory.com/c.../articles.html
-
05-20-2004 01:41 PM #3
Re: Rochester Quadrajet
The gas goes in that little steel line at the front and the air goes in the top.......................an 84 probably doesn't have mixture screws, preset at factory.Originally posted by camaroracer16
I have a question. I have a 84 camaro z/28 with a 305, and i had to put on a new carb recentely. I need to tune the carb a little to get the best fuel economy and best performance mix, due to the damn gas prices. And i was wondering if anybody knew which side was the fuel, and which side is the air. There are two screws on teh front of the carb. I would greatly appricate it.
-
05-21-2004 09:20 AM #4
Its a rebuilt carb, do you think when they rebuilt it, that they left them little plastic things out?





LinkBack URL
About LinkBacks
Reply With Quote
I'm happy to see it back up, sure hope it lasts.
Back online