Thread: Dish and Quench
Results 1 to 7 of 7
LinkBack URL
About LinkBacksThreaded View
-
03-08-2004 12:22 PM #1
CHR Member
- Join Date
- Aug 2003
- Posts
- 1,176
Dish and Quench
Does dish on top of a piston affect quench? I might have to used dished pistons to get the compression ratio I want, and it seems like the crown would be further away from the head if I did so. That's bad, right? I'm thinking I'll need a -12 to -15 cc dish to get 9.3-9.6:1 comrpession. I might use the -15 and then deck slightly above 0 to get 9.4 or 9.5. I do plan to cc the combustion chambers so I could loose some comrpession there. I might take out 2 or 3 cc's.Last edited by 76GMC1500; 03-08-2004 at 12:28 PM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Thanks guys! It's been a long road. Fun doing finishing work for sure. Getting the dash ready for paint and some interior trim. Have to do some finish work on the aluminum headliner before...
Stude M5 build