Guys,

My friend asked me if he should try to polish the needle tips with emery paper, I said probably leave them alone. He does understand finesse, so I'll mention that to him. I have NOT seen the needles, so I can't say if they are really nasty grooved, or, just normal wear (after 40+ years!) with a "small step".

Thanks for the contact for Rochesters. My friend has found his 2bbl 68' is a bit of an orphan in the resto world for parts. Lots of 4bbl stuff...although I bet the needles are the same. Have seen some COOL tri-power setups while looking on the web...but I doubt he wants to spring for a new carb, just some new needle valves...whether it matters or not.

Thanks again, guys