Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Help to get off the line please!
          
   
   

Results 1 to 15 of 23

Threaded View

  1. #16
    BigTruckDriver is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Dec 2004
    Location
    TX
    Car Year, Make, Model: hotrod
    Posts
    1,830

    Another tip is to get a oxygen sensor wired in to the system. It will tell you if you are running rich or lean at idle or through out the rpm range. I think edlebrock sells one for about 100 dollars. Or you can buy one and wire it up to a volt meter and it will do the same. Should get you right on with your fuel mixture. You can also tune your idle mixture with the vacuum gauge.
    Last edited by BigTruckDriver; 11-14-2009 at 12:02 PM.
    Friends dont let friends drive fords!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink