I finally got it running, with some problems. I had the cam out by 90 degrees, I don't know how I got that far off, I guess I was rushing. Now it's running but it revs really high, I thought it was the carbs but that didn't help.

Once again gonna check the valves, the repair manual doesn't make sense. If I follow it it tells me to adjust the valves when the tappets are up on the lobes. It says to watch until number one just starts to rise and then align the 1&4 mark to the "T" and then adjust, this puts them up on the lobes.

I seem to be getting closer

Sean