Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: Unknown cam?
          
   
   

Reply To Thread
Results 1 to 15 of 39

Hybrid View

  1. 10-24-2008 03:15 PM #1
    techinspector1's Avatar
    techinspector1
    techinspector1 is offline CHR Member
    Visit my Photo Gallery
    Join Date
    May 2003
    Location
    Zephyrhills, Florida, USA
    Car Year, Make, Model: '32 Henway
    Posts
    12,423

    Quote Originally Posted by SSsuperdave
    Just to really get ya'll riled up, the junkyard motor I'm using this cam is a factory roller block! What a waste, huh?
    You should be tied to a pole and caned.

    Put the cam back in the block and check the intake closing point at zero lift and 0.050" tappet lift. That will tell you what static compression ratio you need to use in the motor to get the proper dynamic compression ratio in order to have a motor or not have a motor.
    Last edited by techinspector1; 10-24-2008 at 03:22 PM.
    PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
    Reply With Quote Reply With Quote
Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink