Thread: 283 Balancer help...

Tweet

Scroll down to 283, 7 to choose from.....
http://www.damperdoctor.com/Merchant...egory_Code=CHE

The 8" dampers were used on several different applications in the SBC lineup and certainly won't hurt anything in your motor. It does take a little more to twist 'em up if you're looking for the quickest windup. But the 8" balancer in itself isn't going to limit the revability of the motor that much. I'd leave the 8" on the motor and cobble up a custom timing tab to mate with it.

Here's how to nail down the timing tab/damper ring so you can time the motor with a light....
http://www.crankshaftcoalition.com/w...op_dead_center

thank you....figured it was ok. Really wanted to bolt a timing tab on and go..damit