almost. it was just running realy lean on the rear carb. Placed my hand on the carb to cover primaries and it smooth out a lot had slight stumble and the idel picked up, i adjusted the idel mix screws to 2 turns out on the rear carb and 1/2 on the front and it runs mutch better vacuum almost totaly steady 18 inches, but now i noticed one of the front squirters is dripping (hence the stumble ) but only when running, checked the floats and needle and seat , same thing, reduced fuel presure to 3 psi (just a test) and still dripping shut motor off and the drip stops instantly, fuel pressure does not drop stays where set. i have no idea, any suggestions?

P.S. thanks for all your help so far, you guys are great !!!!