Thread: Can I tune out this bog?

Tweet

i have run cam s this big or bigger for many years and have had about 3 inchs of vac. i have all ways plug the power valves and go up about 10 jet sizes . and i run 10 on the crank .26 in the distributor all in below 3000 . have set up many cars this way it works just fine. for me here is some thing s i will add make sure you do not go past the idle transfer slots when you turn up the idle if this happens you will loose your ilde circuit you can open the back barrels to help this. and if you play with the squirters fined the holley tube discharge nozzel s .i have played with the cam ramps to for pump shot this i would do before the disharge nozzels if you are running a MSD dist the way to go is the red bushing for the cure and one lite sliver and one blue curve spring