Thread: condenser location
Results 1 to 3 of 3
LinkBack URL
About LinkBacks-
11-26-2006 07:05 PM #1
CHR Member/Contributor
- Join Date
- Feb 2004
- Location
- Bella Coola
- Car Year, Make, Model: 1948 Thames E83W- and many others
- Posts
- 789
condenser location
Hey Gang,
Does the condenser have to be mounted as close as possible to the points or can I mount it on the neg side of the coil and ground.
I'm asking because we are working on a old gas tractor and can't find a condenser like the old one that will fit under the cap
thanks
hank
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
11-26-2006 07:31 PM #2
CHR Member
- Join Date
- Aug 2005
- Location
- sparwood
- Car Year, Make, Model: 29 plymouth,28 stude dictator,37 chev
- Posts
- 145
old tractor
if its any help most of the oldies used ford ignition parts!, i'm not sure if it'll
work but if the condenser is on the outside it will have to be grounded to the dist base.
-
11-26-2006 08:23 PM #3
CHR Member/Contributor
- Join Date
- Feb 2004
- Location
- Bella Coola
- Car Year, Make, Model: 1948 Thames E83W- and many others
- Posts
- 789
OK thanks guys
I'll mount it outside the distibutor and not on the coil
DennyW That is just about the same condenser I'm using (Bosch VW part)
thanks
hank
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Is that the right kind of fitting? It looks like it should be a tapered fitting. Isn't the bottom of the rack fitting tapered?
pwr steering rack leak