Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: 350 problems
          
   
   

Reply To Thread
Results 1 to 4 of 4
  1. #1
    chevybogger72 is offline Registered User Visit my Photo Gallery
    Join Date
    Aug 2006
    Location
    bancroft
    Posts
    1

    350 problems

     



    i recently just baught a 1988 350 throttle body that i converted into a pump gas but i cant keep it running ive put 3 different fuel pumps on the motor and none of them work i was just wondering if the crome shaft that touches the cam is to short because i got it out of an old 305 i had laying in my yard if anyone could help me that would be greatly appreciated

  2. #2
    pat mccarthy's Avatar
    pat mccarthy is offline CHR Member/Contributor Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    is it a roller engine? if so it will not have any lobe on the cam to work the fuel pump. all v8 chevy take the same fuel pump push rod
    Irish Diplomacy ..the ability to tell someone to go to Hell ,,So that they will look forward to to the trip

  3. #3
    cffisher's Avatar
    cffisher is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2006
    Location
    Constantine
    Car Year, Make, Model: 57 chevy 2 dr wagon
    Posts
    9,476

    time for an electric fuel pump
    Charlie
    Lovin' what I do and doing what I love
    Some guys can fix broken NO ONE can fix STUPID
    W8AMR
    http://fishertrains94.webs.com/
    Christian in training

  4. #4
    S&S62biscayne is offline CHR Member Visit my Photo Gallery
    Join Date
    Nov 2005
    Location
    cranbourne
    Posts
    19

    depending on the block casting number all 880 casting blocks never had the lobe on the cam to run the eccentric for the pump.

    If its a 638 casting block roller cam as these came in both roller and flat tappet it may have it but may not .

    Most of the ones ive seen do.

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink